TM 9-2350-256-34
0029 00
Removal
1.
Support rear (lower) end of hydraulic control panel (subplate) by opening operator's and mechanic's hatches and looping a
chain through hatches. Secure chain to lower end of panel to support it. Remove attaching bolts at rear support bracket and
remove subfloor plate 1 (WP 0022 00).
2.
Remove six screws (1) and lockwashers (2). Discard lockwashers.
3.
Disconnect three leads (3).
4.
Disconnect two fuel lines (4).
5.
Remove fittings (5).
6.
Remove three screws (6), lockwashers (7), and mechanical transmission bracket (8). Discard lockwashers.
7.
Disconnect fuel line (9) and two CO2 lines (10).
8.
Disconnect CO2 line (11) and two CO2 lines (12).
9.
Remove two CO2 lines (13).
0029 00-2
