TM 9-2350-256-34
0070 00
6.
Introduce hoist rope through mechanic's or driver's hatch and support weight of boom actuating cylinder (4).
NOTE
Refer to the illustration below for access to the right boom actuating cylinder (4).
7.
Disconnect two hydraulic lines (11).
8.
Remove two screws (12), lockwashers (13), and retainer (14). Discard lockwashers.
9.
Using adapter and puller, remove cylinder eye pin (15) from boom actuating cylinder (4).
10. While guiding by hand and using hoist rope, remove boom actuating cylinder (4) out thru driver's or mechanic's hatch.
0070 00-4
