TM 9-2350-256-34
0070 00
Installation
1.
While guiding by hand and using hoist rope, move boom actuating cylinder (4) into position thru driver's or mechanic's
hatch.
2.
Align pin holes with tapered drift and install piston eye pin (15) using wood block and hammer.
3.
Install retainer (14), two lockwashers (13), and screws (12).
4.
Connect two hydraulic lines (11).
5.
Install boot (3).
NOTE
Start hydraulic system and exercise boom actuating cylinders (4) through their entire strokes to purge
all air from cylinders prior to installing piston eye pins (10).
NOTE
Support boom actuating cylinder (4) while installing piston eye pin (10).
6.
Align pin holes with tapered drift and install piston eye pin (10) using wood block and hammer.
NOTE
If boot (3) is replaced, use part number 11672351 and adhere joining strips at installation using adhesive.
7.
Install retainer (9), two lockwashers (8), and capscrews (7). Move boot (3) into position covering piston eye pin (10).
0070 00-5