TM 9-2350-256-34
0072 00
1.
Steam clean inside of hydraulic oil tank and allow condensed water to drain off. Wash down outside of tank with a cloth
saturated with cleaning compound or paint thinner.
Inspection-Acceptance and Rejection Criteria
1.
Inspect welds for cracks and defects. Repair defective welds.
2.
Inspect tank surfaces for cracks, nicks, rust, and corrosion. Remove nicks with a fine file and crocus cloth. Remove rust or
corrosion with crocus cloth.
3.
Inspect painted surfaces for chipping and scraping. Clean and touch up painted surfaces that are chipped, scraped, rusted,
or corroded.
Assembly
1.
Install nipple (82), valve (81), adapter union (80), pipe tee (79), and elbow (78) to hydraulic oil tank (26).
2.
Install packing (77), suction pipe (76), two flanges (75), four lockwashers (74), and screws (73) to hydraulic oil tank (26).
3.
Install two packings (hidden) (72) to two lower return pipes (71).
4.
Install two lower return pipes (71), four flanges (70), eight lockwashers (69), and screws (68) to front cover (62).
5.
Install upper return pipe (67), two flanges (66), four lockwashers (65), and screws (64) to front cover (62).
6.
Install gasket (63), front cover (62), 12 lockwashers (61), and screws (60) to hydraulic oil tank (26).
0072 00-9
