TM 9-2350-256-34
0073 00
INTERMEDIATE MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
HYDRAULIC OIL TANK TOP COVER ASSEMBLIES REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Tool kit, general mechanic's (item 34, WP 0086 00)
Screws (4) (item 112 WP 0087 00)
Screws (2) (item 214, WP 0087 00)
Materials/Parts
Equipment Condition
Gaskets (2) (item 42, WP 0087 00)
Lockwashers (26) (item 161, WP 0087 00)
Subfloor plates 8, 10, and 11 removed (TM 9-2350-
Screws (24) (item 56, WP 0087 00)
256-20)
Removal
1.
Disconnect five drain lines (1) and stow out of way.
NOTE
Perform steps 2 thru 4 to remove rear top cover (4).
2.
Remove four screws (2) and identification plate (3) from rear top cover (4).
3.
Remove two adapter unions (5) and nuts (6) from rear top cover (4).
4.
Remove 12 screws (7), lockwashers (8), rear top cover (4), and gasket (9) from hydraulic oil tank (10). Discard lockwashers
and gasket.
0073 00-1
