TM 9-2350-256-34
INTERMEDIATE MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
HYDRAULIC OIL TANK FRONT COVER ASSEMBLY REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Tool kit, general mechanic's (item 34, WP 0086 00)
Screws (8) (item 66, WP 0087 00)
Screws (4) (item 72, WP 0087 00)
Materials/Parts
Screws (4) (item 99, WP 0087 00)
Gasket (item 42, WP 0087 00)
Screws (4) (item 217, WP 0087 00)
Lockwashers (12) (item 161, WP 0087 00)
Screws (4) (item 226, WP 0087 00)
Lockwashers (12) (item 162, WP 0087 00)
Lockwashers (12) (item 163, WP 0087 00)
Equipment Condition
Lockwashers (4) (item 185, WP 0087 00)
Subfloor plate 11 removed (TM 9-2350-256-20)
Packings (3) (item 132, WP 0087 00)
Tank drained below level of front cover (TM 9-2350-
Screws (12) (item 56, WP 0087 00)
256-20)
Screws (4) (item 62, WP 0087 00)
Removal
1.
Remove four screws (1), lockwashers (2), two flanges (3), and disconnect hydraulic hose (4) from fittings (5). Discard
lockwashers.
2.
Remove four screws (6), lockwashers (7), two flanges (8), and fittings (5). Discard lockwashers.
3.
Remove and discard packing (hidden) (9).
4.
Remove eight screws (10), lockwashers (11), four flanges (12), and disconnect two hydraulic hoses (13). Discard lock-
washers.
0074 00-1
