TM 9-2350-256-34
INTERMEDIATE MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
PRESSURE SWITCH ASSEMBLY MAINTENANCE
REMOVAL, TESTING, INSTALLATION, ADJUSTMENT
INITIAL SETUP:
Test Equipment
Tools and Special Tools
References
TM 9-2350-256-20
Removal
1.
Remove pressure switch assembly in accordance with TM 9-2350-256-20.
Testing
NOTE
The pressure switch assembly should open when hydraulic pressure of 235 3 psi (1620 21 kPa)
is applied and should close when the pressure drops to approximately 221 8 psi (1524 55 kPa).
Instructions for testing and adjusting the pressure switch assembly are provided below.
0076 00-1