TM 9-2350-256-34
0077 00
Installation
1.
Install gasket (11).
2.
Install fuel transfer pump and auxiliary hydraulic motor assembly motor control valve (5) with nipple, pipe, and tee
connected.
NOTE
Screws (10), handle (9), and spring pin (8) are installed in the right stowage compartment.
3.
Install four screws (10).
4.
Install handle (9) and spring pin (8).
5.
Connect two hydraulic lines (7) and hydraulic line (6).
6.
Connect three hydraulic lines (4) and hydraulic line (3) to fuel transfer pump and auxiliary hydraulic motor assembly motor
control valve (5).
7.
Install guard (2) and two screws (1).
END OF WORK PACKAGE
0077 00-3/4 blank
