TM 9-2350-256-34
INTERMEDIATE MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
SPADE SUBPLATE AND CONTROL VALVE ASSEMBLY MAINTENANCE
REMOVAL, DISASSEMBLY, CLEANING, INSPECTION, ASSEMBLY, INSTALLATION
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Tool kit, general mechanic's (item 34, WP 0086 00)
Packings (6) (item 133, WP 0087 00)
Pin (item 193, WP 0087 00)
Materials/Parts
Pins, cotter (2) (item 115, WP 0087 00)
Screws (4) (item 66, WP 0087 00)
Cleaning compound (item 5, WP 0085 00)
Screws (4) (item 101, WP 0087 00)
Oil (item 8, WP 0085 00)
Screws (4) (item 184, WP 0087 00)
Paint thinner (item 18, WP 0085 00)
Lockwashers (4) (item 161, WP 0087 00)
Equipment Condition
Lockwashers (4) (item 162, WP 0087 00)
Packings (2) (item 127, WP 0087 00)
Subfloor plate removed (TM 9-2350-256-20)
Removal
NOTE
The spade combination control valve can be removed without removing the entire spade subplate and
control valve assembly from the vehicle. This procedure covers removing the subplate and control valve
assembly or the spade combination control valve only.
NOTE
If removing entire spade subplate and control valve assembly (14), perform steps 1 thru 5 only. If
removing only combination control valve (16), perform steps 3, 6, and 7 only.
0079 00-1
