TM 9-2350-256-34
0079 00
2.
Loosen nut (19) and remove union (20) and nut from subplate (5).
3.
Remove two plugs (21) and gage ports (22) from combination control valve (16).
4.
Do not remove adjustment screw (23).
5.
Loosen two nuts (24) and remove two elbows (25) and nuts from subplate (5).
6.
Loosen three nuts (26) and remove adapter unions (27), nuts, and bushing (28) from subplate (5).
7.
Remove valve (29), coupling pipe (30), and tee (31) from subplate (5).
8.
Remove four screws (15) and combination control valve (16) from subplate (5).
9.
Remove and discard two packings (17) and six packings (18) from combination control valve (16).
Cleaning
WARNING
Solvents can burn easily, can give off harmful vapors, and are harmful to skin and clothing. To avoid
injury or death, keep away from open fire and use in a well-ventilated area. If solvent gets on skin or
clothing, wash immediately with soap and water.
1.
Wash all parts in cleaning compound or mineral spirits paint thinner. Dry parts with moisture-free compressed air; then
immerse parts in clean oil to prevent rusting.
0079 00-4
