TM 9-2350-256-34
INTERMEDIATE MAINTENANCE
DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL RECOVERY VEHICLE, FULL
TRACKED: MEDIUM, M88A1
FABRICATED TOOLS AND EQUIPMENT
GENERAL
This WP includes instructions for fabricating items locally. All materials needed to fabricate the items are listed in the tables.
Illustrations are provided following each table.
Engine and Transmission Cart
The engine and transmission cart is used to support and manuever the powerpack outside the vehicle. Refer to Table 1 and Figure
1 for fabrication instructions.
Table 1. Bill of Materials for Engine and Transmission Cart
Item
Qty.
Description
Material
1
2
Rod 0.75 dia x 34 in. lg (1.91 x 86.4 cm)
cr steel
2
8
Bracket 4 x 0.25 x 9 in. lg (10.2 x 0.64 x 22.9 cm)
hr steel
3
2
Plate 1.50 x 0.37 x 2.25 in. lg (3.81 x 0.94 x 5.72 cm)
hr steel
4
1
Channel C 6 x 10.50 lb x 31.50 in. lg (4.76 kg x 80.0 cm)
steel
5
2
Beam S 6 x 12.50 lb x 62 in. lg (5.67 kg x 157.5 cm)
steel
6
8
----
Caster, dual, 360 swivel
7
1
Channel C 6 x 10.50 lb x 59.50 in. lg (4.76 kg x 151 cm)
steel
8
2
Plate 15 x 0.75 x 56 in. lg (38.1 x 1.91 x 142.2 cm)
hr steel
9
2
Gusset 6 x 0.62 x 6 in. lg (15.2 x 1.57 x 15.2 cm)
hr steel
10
1
Beam S 6 x 12.50 lb x 28 in. lg (5.67kg x 71.1 cm)
steel
11
12
Gusset 5.50 x 0.62 x 11 in. lg (14.0 x 1.57 x 27.9 cm)
hr steel
12
2
Plate, cradle 12.75 x 0.62 x 18 in. lg (32.4 x 1.57 x 45.7 cm)
hr steel
13
2
Guide, angle 2 x 2 x 0.25 x 8 in. lg (5.1 x 5.1 x 0.64 x 20.3 cm)
steel
14
2
Gusset 5.25 x 0.62 x 5.25 in. lg (13.3 x 1.57 x 13.3 cm)
hr steel
15
2
Gusset 2.50 x 0.62 x 5.50 in. lg (6.4 x 1.57 x 14.0 cm)
hr steel
16
2
Post, rest 2.75 od x 0.75 id x 1.62 in. lg (7.0 x 1.91 x 4.1 cm), mech tbg
steel
17
1
Channel C 6 x 10.50 lb x 31.50 in. lg (4.76 kg x 80.0 cm) (see detail C)
steel
18
1
Channel C 6 x 10.50 lb x 31.50 in. lg (4.76 kg x 80.0 cm) (see detail C)
steel
19
2
Plate, locator 2 x 0.75 x 7.50 in. lg (5.1 x 1.91 x 19.1 cm) (see detail B)
(.50C-Sil) steel
20
2
Plate, reinf 6 x 0.50 x 31.50 in. lg (15.2 x 1.27 x 80.0 cm) (see detail C)
hr steel
21
1
Channel, boxed 4 x 28 in. lg (10.2 x 71.1 cm)
steel
22
1
Locator 3.50 dia x 6 in. lg (8.9 x 15.2 cm) (see detail A)
AISI-4140 steel
23
2
Plate 15 x 0.75 x 27 in. lg (38.1 x 1.91 x 68.6 cm)
hr steel
24
1
Beam S 6 x 12.50 lb x 28 in. lg (5.67 kg x 71.1 cm)
steel
0088 00-1