TM 9--2350--292--10
0055 00--2
OPERATE IMPACT WRENCH -- CONTINUED
0055 00
6. Shift SYSTEM SELECTOR control lever (7) to REFUEL.
7. Check torque requirements for item being worked on, then adjust FLOW REGULATOR control handle (6) for
approximate torque setting. Use chart (WP 0054 00) as a reference.
8. Set rotary switch (8) for direction of wrench rotation. Be sure switch is turned all the way left or right. Push and
hold trigger (9) to operate wrench.
9. When finished with impact wrench, move FLOW REGULATOR control handle (6) to 10 position.
10. Move SYSTEM SELECTOR control lever (7) to MAIN.
11. Shut down APU (WP 0053 00).
12. Disconnect hoses (2) from impact wrench (4), quick--disconnect couplings (3) and vehicle quick--disconnect
couplings (5).
13. Install hose connection caps on impact wrench, impact wrench hoses and hydraulic compartment connectors.
14. Stow impact wrench and hoses.
2
7
4
8
9
6
5
3
END OF TASK
