TM 9--2350--292--10
TOWED START
0072 00
THIS WORK PACKAGE COVERS:
Towed Start.
INITIAL SETUP:
Personnel Required
Three
References
WP 0013 00
WP 0043 00
WP 0087 00
Under normal conditions and on level terrain, main engine may be started by towing vehicle.
1. Prepare vehicle for towing with tow bar (WP 0043 00).
2. Station an observer in clear view of both operators to direct towing operation.
3. Shift transmission in dead vehicle to second gear.
4. Check that FUEL PUMP switch (1) is ON.
5. Turn MASTER switch (2) ON.
6. Press accelerator pedal down about 1/2 inch.
7. Start towing in a straight line or in a wide sweeping turn at about 8 mph.
8. If engine fails to start in about 3 to 5 minutes, signal observer, stop vehicles, set brakes, shift transmission to park
(P) and troubleshoot (WP 0087 00).
9. When vehicle engine starts, signal observer, and stop vehicles.
CAUTION
If SYSTEM WARNING indicator does not go out in about 20 seconds after engine starts, stop
engine and notify unit maintenance. Failure to comply may result in damage to equipment.
1
2
10. Set brakes, shift transmissions in both vehicles to park (P).
11. Check that engine is operating normally (WP 0013 00).
12. Disconnect tow bar from vehicles and stow (WP 0043 00).
END OF TASK
0072 00--1/2 blank
