TM 9--2350--292--10
0101 00--81
PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING
LUBRICATION INSTRUCTIONS -- CONTINUED
0101 00
TABLE 6 LUBRICATION INSTRUCTIONS -- CONTINUED
13. MAIN ENGINE AOAPSAMPLING
NOTE
Refer to Army Oil Analysis Program (AOAP)
TB 43--0210.
Park vehicle on a level surface. Remove front engine deck
grilles (WP 0033 00). Remove protective cap from sampling
valve. Position sample collection bottle under sampling valve.
Lift sampling valve control and fill bottle to required level.
CAUTION
Make sure oil sampling valve lever is parallel to oil
filter cover and that protective cap is installed and
secured on sampling valve. Failure to properly
position oil sampling valve lever and secure protec-
tive cap may result in loss of engine oil and equip-
ment damage.
Install protective cap on sampling valve. Install front engine
deck grilles (WP 0033 00).
14. TRANSMISSION AOAP SAMPLING
NOTE
Refer to Army Oil Analysis Program (AOAP)
TB 43--0211.
Park vehicle on a level surface. Open engine exhaust grille
door and exhaust pipe door (WP 0032 00). Remove protec-
tive cap from sampling valve. Position sample collection
bottle under sampling valve. Lift sampling valve control and
fill bottle to required level. Install protective cap on sampling
valve. Close exhaust pipe door and engine exhaust grille
door (WP 0032 00).
FRONT ENGINE
DECK GRILLES
ENGINE EXHAUST
GRILLE DOOR
SAMPLING VALVE
OIL FILTER COVER
TRANSMISSION OIL
SAMPLING VALVE
