TM 9--2350--292--10
M239 SMOKE GRENADE SYSTEM
0126 00
THIS WORK PACKAGE COVERS:
Record and Report Forms, Cleaning, Shipping and Storage Requirements
INITIAL SETUP:
Materials/Parts
Cleaning compound, rifle (item 6, WP 0130 00)
Detergent, general purpose (item 10, WP 0130 00)
Lubricating oil (item 28, WP 0130 00)
Wiping rags (item 45, WP 0130 00)
Personnel Required
Three
References
DA PAM 738--750
AR 385--40
AR 75--1
TM 3--250
TM 1300--200--12
FM 5--250
TM 43--0139
WP 0130 00
RECORD AND REPORT FORMS
1. Equipment maintenance forms and procedures are prescribed in DA PAM 738--750.
2. Report accidents involving injury to personnel or damage to material in accordance with AR 385--40.
3. Report accidents or malfunctions in combat or training in accordance with AR 75--1.
4. Refer to TM 3--250, TM 1300--200--12, and FM 5--250 for destruction instructions for grenade launcher.
5. Refer to TM 43--0139, Painting Instructions for Field Use, for painting instructions on the grenade launcher.
CLEANING
NOTE
Do not use wire brush to clean barrels of dischargers.
1. Clear debris from discharger barrels.
2. See that drain holes in barrels are clear by inserting a stiff wire.
3. Clean barrels with rifle cleaning compound or soap and water as applicable.
4. Wipe with a clean, dry cloth. Be sure that no residue remains around the tip plugs which are located at bottom
center in each barrel.
5. Lightly apply lubricant to pins in each barrel.
6. After cleaning and after missions, install canvas covers to protect discharger barrels from dust, grit and debris.
SHIPPING AND STORAGE REQUIREMENTS
Requirements
Designation
Storage Compatibility Group
G
Quality Distance Class
1.4
DOT* Class
Explosive C
DOT* Marking Label
Explosive C
DOT* Marking
Smoke Grenade
Handle Carefully
Keep Fire Away
*Department of Transportation
END OF TASK
0126 00--1/2 blank
