TM 9--2350--292--10
CALIBER .50 MACHINE GUN AND MOUNT MAINTENANCE
0122 00
THIS WORK PACKAGE COVERS:
Machine Gun Removal and Installation, Machine Gun Mount Removal and Installation
INITIAL SETUP:
Personnel Required
Three
References
FM 23--65
TM 9--1005--213--10
For service, refer to FM 23--65 and TM 9--1005--213--10. Perform the maintenance and lubrication procedures autho-
rized at crew level maintenance.
MACHINE GUN REMOVAL AND INSTALLATION
1. Pull two locking pins (1).
2. Lift machine gun from mount (2) and remove.
3. Position machine gun in mount (2).
4. Install two locking pins (1).
1
1
2
MACHINE GUN MOUNT REMOVAL AND INSTALLATION
1. Remove machine gun in accordance with this work package.
2. Loosen traverse lock (1).
3. Lift mount (2) from commander’s cupola support bracket (3).
4. Position mount (2) on commander’s cupola support bracket (3).
5. Tighten traverse lock (1).
6. Install machine gun if desired in accordance with this work package.
1
2
3
END OF TASK
0122 00--1/2 blank
