TM 9--2350--292--10MAINTENANCE AFTER OPERATION ON UNUSUAL TERRAIN0121 00THIS WORK PACKAGE COVERS:Maintenance After Operation On Unusual TerrainINITIAL SETUP:Personnel RequiredThreeReferencesWP 0101 00WP 0111 001. Mud.Clean and lubricate all parts as soon as possible after operation in mud (WP 0101 00).2. AirCleaners.If water is found in the air cleaner, clean and dry the filter element (WP 0111 00).WARNING3. SandandDust.Operation in dusty or sandy areas requires more frequent cleaning and servicing of filters to prevent dust enteringengine, transmission, fuel system, and hydraulic system. Dust build--up on major components increases chanceof entry into internal areas, and interferes with adequate cooling. Pay particular attention to the following serviceareas:• Lubricate vehicle as specified in WP 0101 00, shortening service interval as required.• Carefully clean all areas around lubrication fittings, fill ports, dipsticks, breathers, and filters, before servicingor inspecting.• Have unit maintenance service engine oil filters, fuel filters, transmission oil filter, and hydraulic oil filters.• Check and clean door hinges, fuel filler protective cap and vent, spade lock, boom travel lock.• Monitor brake and steering operation for binding/failure to release. Report malfunctions to unit maintenancepersonnel.END OF TASK0121 00--1/2 blank
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business