STARTING MAIN ENGINE

ENGINE PRESTART OPERATION (cont) - TM-9-2350-292-10_77

STARTING MAIN ENGINE (cont) - TM-9-2350-292-10_79

TM-9-2350-292-10 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
58

TM 9--2350--292--10 0012 00--1 STARTING MAIN ENGINE 0012 00 THIS WORK PACKAGE COVERS: Starting Main Engine INITIAL SETUP: References WP 0101 00 WP 0053 00 WP 0071 00 WP 0072 00 References -- Continued WP 0011 00 WP 0073 00 WP 0087 00 WP 0013 00 WP 0082 00 1. Before starting main engine and driving the vehicle, perform all BEFORE operation procedures in PMCS Table 1 (WP 0101 00). NOTE The main engine can be started normally unless battery voltage is too low to power starter motor. The auxiliary power unit can be started to charge batteries (WP 0053 00). If the auxiliary power unit is nonfunctional, the main engine can be slave started (WP 0071 00) or tow started (WP 0072 00). 2. Prior to starting main engine with any of three starting methods, perform engine prestart procedures (WP 0011 00). WARNING WARNING WARNING NOTE When MASTER switch is on, warning indicators and horn will be on when engine is started until oil pressure builds up. For cold weather start, refer to WP 0073 00. 3. Make sure steering wheel (1) is centered and locked. 4. Turn MASTER switch (2) ON. 1 2

Privacy Statement
Press Release
Contact