TM 9--2350--292--20--1
0201 00--5
ELECTRIC FUEL PUMP AND MOUNT ASSEMBLY REPAIR -- CONTINUED
0201 00
Installation
1. Install new gasket (9), pump and mount assembly (2) and wiring harness 4W101 terminal GND (8) in front fuel
tank (10) with 12 screws (6) and 12 new lockwashers (7). Torque screws 36--48 lb--in. (4.0--5.4 N•m).
2. Install new nonelectrical wire (5) on 12 screws (6) using double--twist method.
WARNING
3. Apply sealing compound to all male pipe threads.
4. Install adapter union (4) and hose assembly (3) on pump and mount assembly (2).
5. Connect wiring harness 4W101 connector P5 (1) to pump and mount assembly (2).
6. Connect battery power (WP 0256 00).
Figure 15
1
3
4
2
9
10
8
6
7
5
