TM 9--2350--292--20--1ELECTRIC FUEL PUMP AND MOUNT ASSEMBLY REPAIR -- CONTINUED0201 00Testing--Continued7. Turn vehicle MASTER switch to OFF (TM 9--2350--292--10).8. Measure the amount of fuel pumped into a three--gallon container. One and a half gallons of fuel (container half full),which is equal to a flow rate of three gallons per minute, is satisfactory. If flow rate is satisfactory, go to step 11.WARNING9. Remove fuel pump assembly (3) in accordance with this work package and inspect screens (4), if clogged, cleanwith dry--cleaning solvent.10. Repeat steps 5 through 8 above. If rate of flow is less than three gallons per minute, notify Direct Support mainte-nance.11. Install quick--disconnect coupling half (1) on hose assembly (2).12. Connect quick--disconnect coupling half (1) on hose assembly (2) to engine.Figure 271243NOTEFOLLOW--ON MAINTENANCE:Install front engine deck grilles(TM 9--2350--292--10)Install subfloor plate #19 (WP 0454 00)END OF TASK0201 00--7/8 blank
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business