TM 9--2350--292--20--1
0232 00--1
ENGINE TOP HOUSING ASSEMBLY AND MOUNTING BRACKET
REPLACEMENT
0232 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (8) (item 2, WP 0718 00)
Assembled--washer screws (10) (item 419, WP 0718 00)
Self--locking nuts (12) (item 248, WP 0718 00)
Equipment Conditions
Engine deck assembly removed (WP 0417 00)
Cooling fans and housings removed
(WP 0235 00)
Seals removed (WP 0190 00)
Hydraulic oil coolers removed (WP 0230 00)
Removal
1. Remove four screws (1), four lockwashers (2) and bracket assembly (3) from engine. Discard lockwashers.
2. Remove four screws (4), four lockwashers (5) and lever link bracket (6) from engine. Discard lockwashers.
3. Remove 10 assembled--washer screws (7) and two access covers (8) from housing assembly (9). Discard as-
sembled--washer screws.
4. Remove 12 self--locking nuts (10) and housing assembly (9) from engine. Discard self--locking nuts.
5. Inspect parts for damage and replace as required.
Figure 40
1
2
3
7
8
9
4
5
6
10
7
10
10
8
10
