TM 9--2350--292--20--1
0231 00--6
ENGINE AND TRANSMISSION OIL COOLER REPLACEMENT -- CONTINUED
0231 00
Installation--Continued
10. Install two hoses (12 and 13) on two connectors (14) and engine.
11. Secure intake manifold heater hose (11) to hose (12) with screw (9), clamp (10) and new self--locking nut (8).
12. Install fuel hose (6) on top of back--flow valve (7).
13. Install engine oil cooler screen (5) on engine with screw (2), new lockwasher (3) and stop tab (4).
14. Close engine oil drain valve plug (1).
Figure 13
7
6
13
14
9
11
8
10
12
14
5
2
3
4
1
NOTE
FOLLOW--ON MAINTENANCE:
Connect wiring harness 3W202 wire
530B to manifold heater fuel solenoid (WP 0300 00)
Install engine oil cooler vent hoses, if removed
(WP 0200 00)
Install air intake elbows (WP 0191 00)
Install powerpack (WP 0188 00)
Install transmission oil cooler lines, if removed
(WP 0345 00)
Fill transmission with oil, if drained (WP 0187 00)
Fill engine with oil, if drained (WP 0187 00)
END OF TASK
