TM 9--2350--292--20--1
0235 00--3
ENGINE COOLING FANS AND HOUSINGS REPLACEMENT -- CONTINUED
0235 00
Removal--Continued
7. Remove six screws (24), six flat washers (25), seal retaining plate (26) and gasket (27) from engine. Discard gas-
ket.
8. Remove seal (28) from housing (29). Discard seal.
9. Inspect parts for damage and replace as required.
Installation
1. Install new seal (28) in housing (29).
2. Install seal retaining plate (26) and new gasket (27) on engine with six screws (24) and six flat washers (25).
Figure 42
24
25
26
27
28
29