TM 9--2350--292--20--1
0251 00--1
LEVEL WIND LIMIT SWITCHES REPLACEMENT
0251 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Battery power disconnected (WP 0256 00)
Level winder guard removed (WP 0507 00)
References
TM 9--2350--292--10
NOTE
There are two level wind limit switches. Both limit
switches are replaced in the same manner. This task re-
places only one level wind limit switch.
Tag all electrical connections and electrical leads prior to
removal to aid in installation.
Removal
1. Disconnect wiring harness 2W602 connector P2 or 2W602 connector P3 (1) from limit switch (2).
2. Remove nut (3), lockwasher (4) and limit switch (2). Retain attaching hardware for installation.
3. Inspect parts for damage and replace as required.
Figure 69
1
2
4
3