HIGH BEAM INDICATOR ASSEMBLY AND BRACKET REPAIR

Disassembly (cont) - TM-9-2350-292-20-1_1307

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
1256

TM 9--2350--292--20--1 0249 00--1 HIGH BEAM INDICATOR ASSEMBLY AND BRACKET REPAIR 0249 00 THIS WORK PACKAGE COVERS: Removal, Disassembly, Assembly, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Materials/Parts Lockwashers (2) (item 90, WP 0718 00) Gasket (item 91, WP 0718 00) Lockwashers (2) (item 9, WP 0718 00) Equipment Conditions Vehicle MASTER switch OFF (TM 9--2350--292--10) Battery power disconnected (WP 0256 00) Personnel Required Two References TM 9--2350--292--10 Removal 1. Disconnect wiring harness 4W107 connector P3 (1) from connector socket J1 of high beam indicator (2). 2. Remove lens (3), gasket (4) and bulb (5). Discard gasket. 3. Remove two screws (6), two lockwashers (7), plate (8) and remainder of indicator (2). Discard lockwashers. 4. Remove two nuts (9), two lockwashers (10), four flat washers (11), two screws (12) and bracket (13) from vehicle. Discard lockwashers. Figure 80 6 7 8 3 4 5 1 2 12 11 11 10 9 13

Privacy Statement
Press Release
Contact