TM 9--2350--292--20--1
0248 00--7
PERSONNEL HEATER CONTROL BOX ASSEMBLY REPAIR -- CONTINUED
0248 00
Assembly--Continued
13. Connect cable assembly (17) to pin 16 of circuit breaker (19).
14. Install new grommet (18) in heater control box assembly lower half (9).
15. Push cable assembly (17) through new grommet (18).
16. Install shell (15) and washer (16) on cable assembly (17). Refer to WP 0290 00 Wiring Harness and Cable
Repair.
17. Install two nuts (11), two screws (14), two new lockwashers (13) and two nuts (12) on heater control box case
assembly (10).
18. Slide heater control box assembly lower half (9) into heater control box case assembly (10), secure with two
screws (8).
Figure 68
10
14
12
13
11
8
9
18
17
15
16
19
