TM 9--2350--292--20--1
0248 00--2
PERSONNEL HEATER CONTROL BOX ASSEMBLY REPAIR -- CONTINUED
0248 00
Disassembly
1. Remove two screws (8), slide heater control box assembly lower half (9) out of heater control box case assembly
(10).
2. Remove two nuts (11), two nuts (12), two lockwashers (13) and two screws (14) from heater control box case as-
sembly (10). Discard lockwashers.
3. Remove shell (15) and washer (16) from cable assembly (17). Refer to WP 0290 00, Wiring Harness and Cable
Repair.
4. Pull cable assembly (17) through grommet (18), remove grommet (18) from heater control box assembly lower
half (9). Discard grommet.
5. Disconnect cable assembly (17) from pin 16 of circuit breaker (19) and remove.
Figure 68
10
14
12
13
11
8
9
18
17
15
16
19
