TM 9--2350--292--20--1
0283 00--3
DOME LIGHT ASSEMBLY REPAIR -- CONTINUED
0283 00
Disassembly--Continued
4. Disconnect electrical lead (15) at connector (16). Remove lens retainer (11) from access cover (14).
5. Remove nonmetallic seal (17) from lens retainer (11). Discard seal.
6. Loosen three screws (18), remove three electrical leads (15, 19 and 20) at switch (21). Remove switch (21) from
lens retainer (11).
7. Remove two screws (22), two lockwashers (23) and lamp assembly (24) from lens retainer (11). Discard lock-
washers.
8. Remove two screws (25), two flat washers (26) and lamp assembly (27) from lens retainer (11).
9. Remove four screws (28), four lockwashers (29) and partition (30) from lens retainer (11). Discard lockwashers.
10. Remove seven screws (31), retaining plate (32), two lenses (33 and 34), nonmetallic seal (35) and gasket (36)
from lens retainer (11). Discard seal and gasket.
11. Remove two screws (37), connector (16) and preformed packing (38) from access cover (14). Discard preformed
packing.
12. Remove setscrew (39), push button (40) and spring (41) from switch knob (7).
13. Inspect parts for damage and replace as required.
Figure 94
21
27
26
25
19
32
33
36
17
30
29
28
31
34
24
22
23
20
35
18
38
15
16
37
14
11
39
7
41
40
18