TURBOCHARGER PRESSURE TRANSDUCER DCA REPLACEMENT

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
1364

TM 9--2350--292--20--1 0285 00--1 TURBOCHARGER PRESSURE TRANSDUCER DCA REPLACEMENT 0285 00 THIS WORK PACKAGE COVERS: Removal, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Materials/Parts Lockwasher (item 10, WP 0718 00) Marker tags (item 49, WP 0716 00) Equipment Conditions Vehicle MASTER switch OFF (TM 9--2350--292--10) Powerpack removed (WP 0188 00) NOTE There are two turbocharger pressure transducer DCAs. This task replaces only one transducer. Tag all electrical connections and electrical leads prior to removal to aid in installation. Removal 1. Disconnect wiring harness 3W202 connector (1) from turbocharger pressure transducer DCA (2). 2. Remove screw (3), lockwasher (4), loop clamp (5) and turbocharger pressure transducer DCA (2) from engine. Discard lockwasher. 3. Remove turbocharger pressure transducer DCA (2) from adapter (6). 4. Remove adapter (6) from hose assembly (7). 5. Remove hose assembly (7) from adapter (8); remove adapter (8) from turbocharger. 6. Inspect parts for damage and replace as required. Figure 96 1 2 3 4 5 6 7 8

Privacy Statement
Press Release
Contact