WARNING HORN, WARNING HORN RELAY, AUTOMOTIVE HORN AND LEAD ASSEMBLIES 4W156 REPLACEMENT

Removal (cont) - TM-9-2350-292-20-1_1417

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
1366

TM 9--2350--292--20--1 0286 00--1 WARNING HORN, WARNING HORN RELAY, AUTOMOTIVE HORN AND LEAD ASSEMBLIES 4W156 REPLACEMENT 0286 00 THIS WORK PACKAGE COVERS: Removal, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Materials/Parts Lockwashers (4) (item 85, WP 0718 00) Lockwashers (2) (item 58, WP 0718 00) Equipment Conditions Vehicle MASTER switch OFF (TM 9--2350--292--10) Battery power disconnected (WP 0256 00) Gauge panel removed (WP 0243 00) For maintenance of warning horn, warning horn relay and warning horn lead assembly 4W156 References TM 9--2350--292--10 NOTE Perform Removal steps 1, 2 and 9 and Installation steps 7 and 8 for maintenance of warning horn relay. Perform Removal steps 3, 4, 5 and 9 and Installation steps 4, 5 and 6 for maintenance of warning horn and warning horn lead assembly 4W156. Perform Removal steps 6, 7, 8 and 9 and Installation steps 1, 2 and 3 for maintenance of automotive horn and automotive horn lead assembly 4W156. Removal 1. Disconnect wiring harness 4W116 connector P2 (1) from warning horn relay (2). 2. Remove two screws (3), two lockwashers (4), clamp (5) and warning horn relay (2) from vehicle. Discard lock- washers. Figure 99 3 2 1 4 5

Privacy Statement
Press Release
Contact