TM 9--2350--292--20--1
0292 01--1
WIRING HARNESS 2W612 REPLACEMENT (OVERRIDE MODIFICATION)
0292 01
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (21) (item 58, WP 0718 00)
Lockwashers (9) (item 9, WP 0718 00)
Grommet (item 348, WP 0718 00)
Lockwashers (2) (item 11, WP 0718 00)
Marker tags (item 49, WP 0716 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Battery power disconnected (WP 0256 00)
Crew compartment subfloor plates #8, #9, #10, #11,
#13, #14, #15, #18, #22, #27 and #29 removed
(WP 0454 00)
References
TM 9--2350--292--10
Removal
NOTE
Tag all electrical connections and electrical leads prior to
removal to aid in installation.
The following legend identifies attachment points for each
connection.
Retain attaching hardware securing wires 359A, 359B
and ground wire for installation.
1. Remove wiring harness (1) and attaching hardware, at the following attachment points:
Item
No.
2W612
Connector/Lead/Wire
From
Connector/Lead/Wire
Component
Location
2
Connector P7
PMI Pressure Switch
Main Winch Power Reduction
Manifold (below subfloor
plates)
3
Connector P8
PMO Pressure Switch
Main Winch Power Reduction
Manifold (below subfloor
plates)
4
Connector P1
PMI--b Safety Valve
Main Winch Power Reduction
Manifold (below subfloor
plates)
5
Connector P2
PMO--b Safety Valve
Main Winch Power Reduction
Manifold (below subfloor
plates)
6
Connector P3
PMI--a Safety Valve
Main Winch Power Reduction
Manifold (below subfloor
plates)
7
Connector P4
PMO--a Safety Valve
Main Winch Power Reduction
Manifold (below subfloor
plates)
