TM 9--2350--292--20--1
0301 00--2
WIRING HARNESS 3W203 REPLACEMENT -- CONTINUED
0301 00
Removal--Continued
2. Remove nut (6), flat washer (7), capacitor lead (8), wiring harness 3W202 wire 26 (9) and wiring harness 3W203
(4) terminal T2 from B+ terminal of generator (10).
3. Remove wiring harness 3W203 (4) from engine cable bracket (11) and engine.
4. Inspect parts for damage and replace as required.
Installation
1. Thread wiring harness 3W203 (4) through engine cable bracket (11) so that terminal T2 is on the generator side of
the engine.
2. Install wiring harness 3W203 (4) terminal T2, wiring harness 3W202 wire 26 (9) and capacitor lead (8) on B+ ter-
minal of generator (10) with flat washer (7) and nut (6).
Figure 147
6
7
8
4
11
10
9
FORWARD
