TM 9--2350--292--20--1
0059 00--1
ENGINE STARTER CRANKS WHEN MASTER SWITCH IS TURNED ON OR
ENGINE STARTER FAILS TO SHUT OFF WHEN ENGINE IS RUNNING
0059 00
THIS WORK PACKAGE COVERS:
Engine Starter Cranks When Master Switch Is Turned On or Engine Starter Fails To Shut Off When Engine Is
Running
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Multimeter (item 84, WP 0717 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Engine deck removed (WP 0417 00)
Powerpack removed (WP 0188 00)
Personnel Required
Two
Is zero volts indicated?
1. Disconnect harness 3W207 P1 from engine
disconnect.
2. Remove switch panel (WP 0242 00) and
reconnect ground strap to switch panel.
3. Disconnect harness 4W101 P1 from switch
panel receptacle.
4. Turn MASTER switch ON
(TM 9--2350--292--10).
5. Place multimeter red lead on harness 4W109
J3 pin A and black lead to ground. Check for
voltage.
6. Turn MASTER switch OFF
(TM 9--2350--292--10).
A
WARNING
Remove rings, bracelets, wristwatches,
and neck chains before working on any
vehicle. Jewelry can catch on equip-
ment and cause injury, or may short
across an electrical circuit and cause
severe burns or electrical shock.
CONTINUED ON NEXT PAGE
FORWARD
