TM 9--2350--292--20--1
0073 00--6
VEHICLE FAILS TO MAKE SMOKE -- CONTINUED
0073 00
CONTINUED FROM STEP K
L 1. Disconnect lead T at switch S10 connector.
2. Place one multimeter lead in lead 26B
connector socket and other lead in lead T
connector socket. Check for continuity.
Is continuity present?
no
yes
CONTINUED ON NEXT PAGE
no
yes
Repair (WP 0290 00) or
replace (WP 0318 00)
harness 4W106. Verify
fault is corrected.
Is continuity present?
1. Reconnect lead T at commander’s EXHAUST
SMOKE switch.
2. Disconnect lead 26B at driver’s EXHAUST
SMOKE switch.
3. Turn OFF commander’s EXHAUST SMOKE
switch and turn ON driver’s EXHAUST
SMOKE switch (TM 9--2350--292--10).
4. Place one multimeter lead in harness 4W118
J1 socket C and other lead on lead 26B switch
connector pin. Check for continuity.
M
Place one multimeter lead in lead T connector at
commander’s EXHAUST SMOKE switch and
place other lead on pin D of harness 4W106 P1.
Check for continuity.
Is continuity present?
N
Replace commander’s
EXHAUST SMOKE
switch (WP 0259 00).
Verify fault is corrected.
CONTINUED FROM
STEP J
