TM 9--2350--292--20--1
0073 00--4
VEHICLE FAILS TO MAKE SMOKE -- CONTINUED
0073 00
CONTINUED ON NEXT PAGE
H
Is 24 V dc present?
CONTINUED FROM STEP G
no
yes
I
1. Reconnect harness 3W143 to engine and
bulkhead disconnects.
2. Remove switch panel from bracket
(WP 0242 00) and reconnect ground strap to
switch panel.
3. Disconnect harness 4W106 P1 from switch
panel.
4. Start engine (TM 9--2350--292--10).
5. Place multimeter red lead in harness 4W118 J1
socket C and black lead to ground. Check for
voltage.
6. Shut engine down (TM 9--2350--292--10).
Is 24 V dc present?
1. Open air intake grilles above battery
compartment (TM 9--2350--292--10).
2. Disconnect harness 3W143 P2 from bulkhead
disconnect.
3. Start engine (TM 9--2350--292--10).
4. Place multimeter red lead in harness 4W103
P3 socket B and black lead to ground. Check
for voltage.
5. Shut engine down (TM 9--2350--292--10).
Repair (WP 0290 00) or
replace (WP 0295 00)
harness 3W143. Verify
fault is corrected.
no
yes
Repair (WP 0290 00) or
replace (WP 0318 00)
lead 26B from harness
4W118 J1 to harness
4W106 connector. Verify
fault is corrected.
