TM 9--2350--292--20--1
0087 00--6
HYDRAULIC OIL CONSTANTLY OVERHEATS -- CONTINUED
0087 00
Do oil cooler doors open when PTO switch is ON and
close when PTO switch is turned OFF?
1. Remove hydraulic oil coolers (WP 0230 00).
2. Turn MASTER switch ON
(TM 9--2350--292--10).
3. Turn PTO switch ON (TM 9--2350--292--10)
and observe hydraulic oil cooler doors.
4. Turn PTO switch OFF (TM 9--2350--292--10)
and observe hydraulic oil cooler doors.
5. Turn MASTER switch OFF
(TM 9--2359--292--10).
H
CONTINUED FROM STEP G
no
yes
Verify fault is
corrected.
Are doors properly installed and is all hardware and
gaskets present, tight, and free of damage?
Inspect oil cooler doors for proper installation and
loose, missing, and damaged hardware and gas-
kets.
I
no
yes
Go to WP
0144 00 Step K.
Repair, replace, or
tighten as necessary
(WP 0230 00).
Verify fault is
corrected.
FORWARD
CONTINUED ON NEXT PAGE
WARNING
