BLACKOUT DRIVE LIGHTS FAIL TO OPERATE (cont)

BLACKOUT DRIVE LIGHTS FAIL TO OPERATE. (cont)

BLACKOUT DRIVE LIGHTS FAIL TO OPERATE (cont) - TM-9-2350-292-20-1_601

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
556

TM 9--2350--292--20--1 0121 00--3 BLACKOUT DRIVE LIGHTS FAIL TO OPERATE -- CONTINUED 0121 00 Is 24 V dc present? 1. Disconnect harness 4W105 P1 from switch panel. 2. Turn MASTER switch ON (TM 9--2350--292--10). 3. Place multimeter red lead in harness 4W105 P1 socket N and black lead to ground. Check for voltage. 4. Turn MASTER switch OFF (TM 9--2350--292--10). no yes Repair (WP 0290 00) or replace (WP 0317 00) harness 4W105. Verify fault is corrected. no yes Repair (WP 0290 00) or replace (WP 0242 00) harness 4W151. Verify fault is corrected. E F 1. Disconnect harness 4W151 P1 from switch S8. 2. Place one multimeter lead in harness 4W151 P1 socket F and other lead on harness 4W151 J4 pin N. Check for continuity. Is continuity present? CONTINUED ON NEXT PAGE CONTINUED FROM STEP C

Privacy Statement
Press Release
Contact