TM 9--2350--292--20--1
0122 00--2
REAR SERVICE LIGHT FAILS TO OPERATE -- CONTINUED
0122 00
1. Disconnect lead 16 from rear service light
switch.
2. Turn MASTER switch ON
(TM 9--2350--292--10).
3. Turn main light switch to any position except
OFF (TM 9--2350--292--10).
4. Turn rear service light switch ON
(TM 9--2350--292--10).
5. Place multimeter red lead in lead 16
connector socket and black lead to ground.
Check for voltage.
6. Turn MASTER switch OFF
(TM 9--2350--292--10).
no
yes
Go to Step I.
no
yes
C
D
CONTINUED ON NEXT PAGE
1. Remove switch panel from bracket (WP
0242 00) and reconnect ground strap to switch
panel.
2. Disconnect harness 4W105 P1 from switch
panel.
3. Turn MASTER switch ON
(TM 9--2350--292--10).
4. Place multimeter red lead in harness 4W105 P1
socket N and black lead to ground. Check for
voltage.
5. Turn MASTER switch OFF
(TM 9--2350--292--10).
Is 24 V dc present?
Is 24 V dc present?
Repair (WP 0290 00) or
replace (WP 0317 00)
harness 4W105. Verify fault
is corrected.
CONTINUED FROM STEP B
