TM 9--2350--292--20--1
0123 00--1
EMERGENCY FLASHER LIGHT FAILS TO OPERATE
0123 00
THIS WORK PACKAGE COVERS:
Emergency Flasher Light Fails to Operate
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Multimeter (item 84, WP 0717 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Personnel Required
Two
no
yes
Go to Step C.
Is 24 V dc present?
1. Remove emergency flasher light lamp (WP
0277 00).
2. Turn MASTER switch and emergency flasher
light switch ON (TM 9--2350--292--10).
3. Place red multimeter lead in lead 325A
connector socket and black lead to ground.
Check for voltage.
4. Turn MASTER switch OFF
(TM 9--2350--292--10).
A
no
yes
Replace emergency
flasher light lamp (WP
0277 00). Verify fault is
corrected.
B
Place one multimeter in lamp connector socket
and lead on lamp ground connector. Check for
continuity.
Is continuity present?
WARNING
Remove rings, bracelets, wristwatches,
and neck chains before working on any
vehicle. Jewelry can catch on equip-
ment and cause injury, or may short
across an electrical circuit and cause
severe burns or electrical shock.
Remove emergency
flasher light assembly.
Clean mounting
surface. Remount light
assembly (WP
0277 00). Verify fault is
corrected.
CONTINUED ON NEXT PAGE
