EMERGENCY FLASHER LIGHT FAILS TO OPERATE (cont)

EMERGENCY FLASHER LIGHT FAILS TO OPERATE

EMERGENCY FLASHER LIGHT FAILS TO OPERATE (cont) - TM-9-2350-292-20-1_608

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
563

TM 9--2350--292--20--1 0123 00--2 EMERGENCY FLASHER LIGHT FAILS TO OPERATE -- CONTINUED 0123 00 no yes Replace connector socket between harness 4W101 wire 325A and emergency flasher light assembly (WP 0277 00). Verify fault is corrected. Is 24 V dc present? 1. Disconnect harness 4W101 wire 325A from emergency flasher light assembly (WP 0277 00). 2. Turn MASTER switch and EMERGENCY FLASHER LIGHT switch ON (TM 9--2350--292--10). 3. Place red multimeter lead in harness 4W101 wire 325A connector and black lead to ground. Check for voltage. 4. Turn MASTER switch OFF (TM 9--2350--292--10). C CONTINUED ON NEXT PAGE CONTINUED FROM STEP A

Privacy Statement
Press Release
Contact