TM 9--2350--292--20--1
0123 00--3
EMERGENCY FLASHER LIGHT FAILS TO OPERATE -- CONTINUED
0123 00
no
yes
Go to Step K.
Is 24 V dc present?
1. Disconnect harness 4W101 P2 from flasher.
2. Turn MASTER switch and FLASHER switch
ON (TM 9--2350--292--10).
3. Place multimeter red lead in harness 4W101
P2 socket B and black lead to ground. Check
for voltage.
4. Turn MASTER switch and FLASHER switch
OFF (TM 9--2350--292--10).
D
no
yes
Repair (WP 0290 00) or
replace (WP 0315 00)
harness 4W101. Verify
fault is corrected.
E 1. Remove switch panel from bracket (WP 0242 00)
and reconnect ground strap to switch panel.
2. Disconnect harness 4W101 P1 from switch panel.
3. Turn MASTER switch ON
(TM 9--2350--292--10).
4. Place multimeter red lead in harness 4W101 P1
socket J and black lead to ground. Check for
voltage.
5. Turn MASTER switch OFF
(TM 9--2350--292--10).
Is 24 V dc present?
CONTINUED ON NEXT PAGE
CONTINUED FROM STEP C