TM 9--2350--292--20--1
0171 00--1
SYSTEM WARNING LIGHT DOES NOT LIGHT WHEN MAIN WINCH
MALFUNCTIONS.
0171 00
THIS WORK PACKAGE COVERS:
System Warning Light Does Not Light When Main Winch Malfunctions
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Multimeter (item 84, WP 0717 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Accessory control panel cover removed (WP 0244 00)
Personnel Required
Two
Is 24 V dc present?
1. Disconnect harness 4W618 P1 from
accessory control panel.
2. Place one multimeter lead on accessory
control panel receptacle J2 pin 24 and other
lead on terminal junction T20 connector D.
Check for continuity.
no
yes
no
yes
A
B
CONTINUED ON NEXT PAGE
Place one multimeter lead on terminal junction T20
connector D and other lead to ground. Check for
continuity.
Is continuity present?
WARNING
Remove rings, bracelets, wristwatches,
and neck chains before working on any
vehicle. Jewelry can catch on equip-
ment and cause injury, or may short
across an electrical circuit and cause
severe burns or electrical shock.
Replace lead 509 to
terminal junction T20
(WP 0244 00). Verify
fault is corrected.
Replace terminal junc-
tion T20 (WP 0244 00).
Verify fault is corrected.