TM 9--2350--292--20--1 0187 00--128 0187 00 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS -- CONTINUED TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS, SEMIANNUALLY -- CONTINUED ITEM NO. NOT FULLY MISSION CAPABLE IF: PROCEDURE LOCATION ITEM TO CHECK/ SERVICE INTERVAL SEMIANNUALLY EXTERIOR 40 Auxiliary Winch -- Continued d.   Install vent plug (5). e.   Operate auxiliary winch (1) until drain plug (2) hole is visible through side access plate upper hole (6). LUBRICANTS/ COMPONENTS REFILL CAPACITY EXPECTED TEMPERATURE* +95°F to --10°F (+35°C to --23°C) Above +80°F (Above +27°C) Below--10°F (Below--23°C) OIL: Lubricating Oil, GO MIL--L--2105 6 pints (2.82L) GO--85/140 (0--228) GO--80/--90 (0--226) GO--75 (0--186) *For Arctic Operation, refer to FM 9--207 f.    Fill auxiliary winch (1) with oil through drain plug (2) hole until oil level reaches bottom of oil level check/fill plug (4) hole. g.   Install oil level check/fill plug (4) and drain plug (2). 1 2 4 5 6