TM 9--2350--292--20--20361 00--12HYDRAULIC BRAKE HOSE ASSEMBLY, BLEED VALVE MANIFOLD ANDASSOCIATED PARTS REPLACEMENT (NEW CONFIGURATION)-- CONTINUED0361 00Installation--Continued27. Install one end of hose assembly (8), adapter (12) and new preformed packing (13) in port OUTLET of pump andmotor assembly (4).28. Install other end of hose assembly (8), adapter (9) and new preformed packing (10) in port PIN of power boostmanifold (11).29. Install one end of hose assembly (1), adapter (5) and new preformed packing (6) in reservoir (7).30. Install other end of hose assembly (1), adapter (2) and new preformed packing (3) in port INLET of pump and mo-tor assembly (4).31. Fill reservoir (7) to the proper level with lubricant (WP 0187 00).32. Power up hydraulic system (TM 9--2350--292--10) and check for leaks. Repair as necessary.33. Bleed air from brake system (WP 0356 00).Figure 167123456789101112138NOTEFOLLOW--ON MAINTENANCE:Install interior stowage baskets (WP 0465 00)Install subfloor plates #13, #16, #18 and #22(WP 0454 00)END OF TASK
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business