TM 9--2350--292--20--2
AUXILIARY POWER UNIT LEAD ASSEMBLY 11671380--1 REPLACEMENT
0655 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Marker tags (item 49, WP 0716 00)
Equipment Conditions
APU removed from vehicle (WP 0586 00)
Removal
NOTE
Tag all electrical connections and electrical leads prior to
removal to aid in installation.
1. Loosen captive screw (1) and remove panel (2).
2. Remove two nuts (3), two lockwashers (4), wiring harness 3W711 lead N (5) and lead assembly 11671380--1 wire
P (6) from preheat solenoid (7). Retain attaching hardware for installation.
3. Inspect parts for damage and replace as required.
Installation
1. Install wiring harness 3W711 lead N (5) and lead assembly 11671380--1 wire P (6) on preheat solenoid (7) with
two lockwashers (4) and two nuts (3).
2. Install panel (2) and tighten captive screw (1).
Figure 344
2
1
3
4
6
3
4
5
7
NOTE
FOLLOW--ON MAINTENANCE:
Install APU in vehicle (WP 0586 00)
END OF TASK
0655 00--1/2 blank
