TM 9--2350--292--20--2
AUXILIARY POWER UNIT LEAD ASSEMBLY 11671380--1 REPLACEMENT
(HATZ)
0656 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Materials/Parts
Marker tags (item 49, WP 0716 00)
Adhesive (item 102, WP 0716 00)
Lockwashers (6) (item 286, WP 0718 00)
Equipment Conditions
Battery power disconnected (WP 0256 00)
APU cover removed (WP 0413 00)
Removal
NOTE
Tag all electrical connections and electrical leads prior to
removal to aid in installation.
Where applicable, remove sealant to expose designated
electrical terminals.
1. Remove two nuts (1), three lockwashers (2), wiring harness 3W711 lead N (3), lead assembly 11671380--1 wire P
(4) and three lockwashers (5) from preheat solenoid (6). Discard lockwashers.
2. Inspect parts for damage and replace as required.
Installation
1. Install wiring harness 3W711 lead N (3) and lead assembly 11671380--1 wire P (4) on preheat solenoid (6) with six
new lockwashers (5 and 2) and two nuts (1).
2. Apply sealant to all exposed terminals.
1
3
2
4
6
5
5
2
1
2
NOTE
FOLLOW--ON MAINTENANCE:
Install APU cover (WP 0413 00)
Connect battery power (WP 0256 00)
END OF TASK
0656 00--1/2 blank