TM 9--2350--292--20--2
0680 00--3
WIRING HARNESS 4W504 REPLACEMENT -- CONTINUED
0680 00
Removal--Continued
2. Remove straps, clamps, attaching hardware and lockwashers (A through C), securing wiring harness (1) to ve-
hicle, as shown in illustration. Discard lockwashers.
3. Remove wiring harness (1).
NOTE
If bracket in view B is to be removed, remove wiring
harness 2W602 connector P1 from bracket first
(WP 0292 00)
4. Inspect parts for damage and replace as required.
Installation
NOTE
If bracket in view B was removed, install wiring harness
2W602 connector P1 after bracket is installed
(WP 0292 00)
1. Install wiring harness (1) in vehicle, with straps, clamps, attaching hardware and new lockwashers (A through C),
as shown in illustration.
A
A
B
C
C
A
B
C
1
