TM 9--2350--292--20--2
0684 00--1
HYDRAULIC CONTROL VALVE MANIFOLD ASSEMBLY SWITCH,
TRANSDUCERS AND ASSOCIATED PARTS REPLACEMENT
0684 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Dust protective plug (AR) (item 12, WP 0716 00)
Dust protective cap (AR) (item 45, WP 0716 00)
Dust protective cap (AR) (item 46, WP 0716 00)
Dust protective plug (AR) (item 47, WP 0716 00)
Plastic bags (AR) (item 48, WP 0716 00)
Marking tags (AR) (item 49, WP 0716 00)
Safety goggles (item 93, WP 0716 00)
Wiping rags (item 7, WP 0716 00)
Lubricant (item 51, WP 0716 00)
Materials/Parts--Continued
Preformed packings (14) (item 20, WP 0718 00)
Preformed packings (2) (item 21, WP 0718 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Hydraulic system depressurized (WP 0545 00)
Hydraulic control valve manifold side shields removed
(WP 0519 00)
Main winch and spade assembly removed
(WP 0497 00) for access to transducers 4MT514,
4MT519 and 4MT522
References
TM 9--2350--292--10
NOTE
This task replaces one switch and all transducers on the
hydraulic control valve manifold assembly. Replace only
those components that require replacement.
To replace transducer 4MT514 perform removal steps 1
through 5 and 46 and installation steps 41 through 45.
To replace transducer 4MT515 perform removal steps 6
through 9 and 46 and installation steps 37 through 40.
To replace transducer 4MT516 perform removal steps 10
through 14 and 46 and installation steps 32 through 36.
To replace transducer 4MT517 perform removal steps 15
through 19 and 46 and installation steps 27 through 31.
To replace transducer 4MT518 perform removal steps 20
through 24 and 46 and installation steps 22 through 26.
To replace transducer 4MT519 perform removal steps 25
through 28 and 46 and installation steps 18 through 21.
To replace switch 4S520 perform removal steps 29
through 32 and 46 and installation steps 14 through 17.
To replace transducer 4MT521 perform removal steps 33
through 37 and 46 and installation steps 9 through 13.
