Installation (cont) - TM-9-2350-292-20-2

Installation (cont) - TM-9-2350-292-20-2_1329

LEFT AND RIGHT SIDE BOOM LIMIT VALVE TRANSDUCER, SWITCHES AND ASSOCIATED PARTS REPLACEMENT

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
1293

TM 9--2350--292--20--2 0690 00--10 MAIN HYDRAULIC PUMPS SWITCH, TRANSDUCERS AND ASSOCIATED PARTS REPLACEMENT -- CONTINUED 0690 00 Installation--Continued 16. Install new preformed packing (10) on hose (3). 17. Install hose (3), reducer (7), nut (8) and tee (6) in thermostic valve (9) port C. 18. Connect one end of hose (4) to tee (6) and other end to bulkhead connector (5). 19. Install transducer 4MT524 (2) on hose (3). 20. Install wiring harness 4W503 connector P2 (1) on transducer 4MT524 (2). 1 2 3 4 5 6 9 10 7 8 NOTE FOLLOW--ON MAINTENANCE: Calibrate new transducers (WP 0692 00) Start engine, operate main and hoist winch hydraulic controls several times to purge air from hoses (TM 9--2350--292--10) Check hydraulic system for leaks and fill hydraulic reser- voir (TM 9--2350--292--10) Install floor plate #20 and #22 (WP 0454 00) END OF TASK

Privacy Statement
Press Release
Contact