TM 9--2350--292--20--2
0432 00--5
RIGHT PERSONNEL DOOR ASSEMBLY AND TORSION BAR REPAIR --
CONTINUED
0432 00
Assembly
1. Install two bushings (30) and bearing (31) as an assembly on armor plate (29) and door (22).
WARNING
2. Install outer handle (28), two new spring washers (27), inner handle (26) with flat washer (25), nut (24) and new
cotter pin (23) on door (22) and armor plate (29).
WARNING
3. Clean door seal mating surfaces with dry--cleaning solvent.
4. Apply rubber based adhesive to two new seals (19 and 20), new strip (21) and mating surface on door (22).
5. Install two new seals (19 and 20) and new strip (21) on door (22).
Figure 210
20
19
21
22
29
28
30
24
23
25
26
27
30
31